Battery Management System

for faulty battery identification in bank

1.Voltage: Measures voltage of individual batteries which helps users determine the health and performance of the batteries.

2.Current: Measures the amount of current which flows through each battery bank during the float, charge and discharge mode, as this enables the user to optimize the current flow in the system.

3.Battery Temperature: Monitors the ambient temperature which helps the user in detecting and preventing incorrect temperature levels, which allows for an increase in the battery life.

4.Ambient Temperature: Measures the individual battery temperature to prevent thermal runaway and

overheating.

5.Capacity : Indicates the battery capacity in percentage, which helps one determine

the power of every block.

6.Communication Protocols:

MODBUS RTU/TCP

SNMP (Optional)

TCP/IP (Optional)

7.Communication Ports:

Ethernet

RS 485

RS 232 (Optional)

BMS FEATURES 

VoltageMeasures voltage of individual batteries which helps users determine the health and performance of the batteries.
CurrentMeasures the amount of current which flows through each battery bank during the float, charge and discharge mode, as this enables the user to optimize the current flow in the system.
Battery Temperature

Monitors the ambient temperature which helps the user in detecting and preventing incorrect temperature levels, which allows for an increase in the battery life.

Ambient TemperatureMeasures the individual battery temperature to prevent thermal runaway and overheating.
CapacityIndicates the battery capacity in percentage, which helps one determine

the power of every block.

Communication ProtocolsMODBUS RTU/TCP

SNMP (Optional)

TCP/IP (Optional)

Communication PortsEthernet

RS 485

RS 232 (Optional)

 1.Environmental

Operating temperature

5°C~50°C, 5%~90%RH
Storage temperature10°C~70°C, 5%~90%RH
Power Requirements:

Battery Sensor

Powered from battery
String SensorDC8~13V,2W
ConverterDC8~13V,3W
Main Module 85~260VAC, 100~370VDC,15W
ProtectionTest load and power paths are fused
2.Measurement Range & Accuracy : 

 String (Bank) voltage       

 20~800V ± (0.5% + 0.2V)
Cell voltage                        1.5~2.5V ± (0.1% + 0.1mV) 9~16V ± (0.1% + 10mV
String current                                   0~500A (Optional)
Communication Interfaces                        RS232, RS485 ports Ethernet 10/100 Mbps MODBUS protocol
Insulation                                                  2000V AC
Digital Signal                    1 Potential free contact, 220V DC/1A

Quick Quote

Get A Free Quote
close slider

Contact us for free quote

* All Fileds are required.

WhatsApp chat